Packaging pattern repeat calculator
Locate a horizontal motif at two packaging joins. Enter the repeat width, face widths and starting offset to plan a wrap proof.
Check pattern joins
2 joins measured across 144 mm
| Join | Distance from left (mm) | Motif phase (mm) | To next boundary (mm) |
|---|---|---|---|
| Front-to-side join | 90 | 18 | 18 |
| End of side | 144 | 0 | 0 |

Will a stripe land on the fold?
With a 36 mm repeat starting at the left edge, a 90 mm front ends 18 mm into the motif. Add a 54 mm side and the next join falls exactly on a repeat boundary at 144 mm. Shift the initial offset to move a distinctive stripe away from a fold.
Mark both joins on the supplier’s dieline and make a physical proof. This horizontal calculation assumes a straight repeat; it does not model bleed, glue allowances or half-drop repeats.
Moving a leaf off one fold can put it on the next
Check both joins before choosing an offset. In this fictional artwork, a leaf occupies 9–15 mm of a 32 mm straight repeat. The front is 76 mm wide and the side is 38 mm. The three phase pairs below came from live calculator CSV exports on November 17, 2026. The crease-crossing column is an editorial comparison with the leaf interval, not automatic artwork inspection.
| Offset | Fold phases: front / end of side | Crease through the leaf |
|---|---|---|
| 0 mm | 12 / 18 mm | Front fold |
| 26 mm | 6 / 12 mm | End of side |
| 10 mm | 22 / 28 mm | Neither nominal fold |
Try the 10 mm offset on a folded sample
Enter the example
Set repeat width to 32 mm, front face to 76 mm and side face to 38 mm. Try offsets of 0, 26 and 10 mm separately, downloading each CSV. Compare its Motif phase values with the fictional leaf interval, 9–15 mm. The tool does not inspect artwork or classify a leaf.
Mark both creases
At offset 10 mm, the phases are 22 and 28 mm, outside the leaf interval at both nominal folds. The CSV puts the joins 76 and 114 mm from the left edge. Mark those distances on the supplier’s dieline and wrap an actual-size strip around a dummy. Check the leaf against the supplier’s fold tolerance; paper thickness and print registration still need a physical proof.
Keep the proof with the visual brief
Once the folded sample is approved, photograph it and open the packaging mockup tool linked below. Ask to show the approved front and adjacent side together so a reviewer can inspect both folds. Keep the sample and CSV with the packaging proof review. This example has no supplier dieline, physical sample or generated mockup; these are your next steps.
Frequently asked questions
What does phase mean at a packaging join?
Phase is the distance into the current motif at the fold. An 18 mm phase in a 36 mm repeat places the fold halfway through the motif. Zero puts the fold on its boundary.
How can I move the motif without changing the box?
Change the starting offset while keeping the measured face widths fixed. With a 36 mm repeat and a 90 mm front, an 18 mm starting offset puts the first join on a repeat boundary.
Why is the distance to the next boundary zero?
At that join the artwork already meets a repeat boundary. If the motif itself crosses the tile edge, inspect how that feature wraps on the folded proof.
Can I use this for a half-drop or a glue flap?
The calculation follows a straight horizontal repeat across two faces. Ask the supplier to assess row offsets, glue areas, bleed and fold tolerances on the actual production dieline.